1 / 27
+22
ST1 31.8 Stem
FEATURES
- Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill mountain bikes
- Machined from solid 6061 T6 aluminum
- Compatible with G1 Gyro System
SPECIFICATIONS
- 31.8mm clamp diameter
- 31mm length (169g)
- 35mm length (170g)
- Zero rise
- 58mm width
- 35mm stack height
- M6 x 1.0 x 18mm / 20mm stainless steel bolts
INTENDED USE
- All MTN / Enduro
- Downhill / Freeride
- Dirt Jump / Slopestyle
- Skatepark / Street
RECOMMENDATIONS
Handlebar clamps to be tightened with equal gaps on top and bottom. All stems have MAX Torque specs etched onto the stem body. Note that MAX torque specs are just that, a maximum rating. For most purposes, 5-6nm should be adequate.
FEATURES
- Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill mountain bikes
- Machined from solid 6061 T6 aluminum
- Compatible with G1 Gyro System
SPECIFICATIONS
- 31.8mm clamp diameter
- 31mm length (169g)
- 35mm length (170g)
- Zero rise
- 58mm width
- 35mm stack height
- M6 x 1.0 x 18mm / 20mm stainless steel bolts
INTENDED USE
- All MTN / Enduro
- Downhill / Freeride
- Dirt Jump / Slopestyle
- Skatepark / Street
RECOMMENDATIONS
Handlebar clamps to be tightened with equal gaps on top and bottom. All stems have MAX Torque specs etched onto the stem body. Note that MAX torque specs are just that, a maximum rating. For most purposes, 5-6nm should be adequate.
Select Length
Select Color
From $25.50
Original: $72.87
-65%ST1 31.8 Stem—
$72.87
$25.50Description
FEATURES
- Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill mountain bikes
- Machined from solid 6061 T6 aluminum
- Compatible with G1 Gyro System
SPECIFICATIONS
- 31.8mm clamp diameter
- 31mm length (169g)
- 35mm length (170g)
- Zero rise
- 58mm width
- 35mm stack height
- M6 x 1.0 x 18mm / 20mm stainless steel bolts
INTENDED USE
- All MTN / Enduro
- Downhill / Freeride
- Dirt Jump / Slopestyle
- Skatepark / Street
RECOMMENDATIONS
Handlebar clamps to be tightened with equal gaps on top and bottom. All stems have MAX Torque specs etched onto the stem body. Note that MAX torque specs are just that, a maximum rating. For most purposes, 5-6nm should be adequate.
